RapidFuse Board is now for sale!

Product Page for the RapidFuse Board

The RapidFuse Board is built from extremely high quality PCBs, heavy copper pours (to minimize voltage drop, heat, and resistance), and the best Phoenix connectors available for the application.  These boards are not designed to be cheaper than an AGC fuse row, these are designed to be better and much faster to install. The board comes in two colors and drastically speeds up installations.

The RapidFuse Board uses PTC thermistors to protect each circuit.  A thermistor is a resistive device, the resistance of which increases with temperature.  Because current flowing through a resistance generates heat, the device will respond very quickly to overloads and stop current flow.  This is convenient because the device tends to reset itself when the overload condition is corrected.  This also ensures that a one-time occurrence doesn’t cause permanent disruptions.

In the event that a different circuit size is required or an electrical inspector has a strict interpretation of the NEC, optional fuse clips are provided.  Simply use a pair of snips to cut the leads of the PTC at the circuit board and install the desired fuse.

Each Power Input Connection can accept wires between 16 and 6 AWG wire.  Do not use wires that are outside this range as the connection will not be secure.  The Phoenix Connector is rated for 76 amps per circuit to ensure longevity and reliability.  Because of the high current capacity of these connections, it is acceptable to “daisy chain” them with heavy enough cable. 

Each Power Output Connection can accept between 24 and 12 AWG wire.  Do not use wires that are outside this range as the connection will not be secure.  The Phoenix Connector is rated for 32 amps per circuit to ensure longevity and reliability.