i97+ All In One Chamber Driver

$975.00

The i97+ is a combination of a NanoW and 1 ½ H64 cards, with 12 pin groups. The card has full input and output circuitry, so it can be used for remote console feedback. With built in PWM controller, each pin is capable of high resolution reiterations, pizzicatos, tremolo outputs, slider motor PWM drives, and more. Features built in, remotely accessible configuration terminal.

The i97+ is a combination of a NanoW and 1 ½ H64 cards, with 12 pin groups. The card has full input and output circuitry, so it can be used for remote console feedback. With built in PWM controller, each pin is capable of high resolution reiterations, pizzicatos, tremolo outputs, slider motor PWM drives, and more. Features built in, remotely accessible configuration terminal.

Every group of 8 pins is capable of driving 6 amps..  This can be made up of any combination (6 amps on 1 pin or .75 amp on each pin), meaning this card can drive 2 ohm loads at 14 volts (for reference, 68 feet of 24 gauge telephone wire has a 1 3/4 ohm resistance).  This card will drive any valve with ease.  

INTELLIGENT
CURRENT MONITORING

The card has a high speed processor that, in addition to performing frame catches from the console and providing returns, precisely monitors current flow to each group of outputs on a header.  Should an over-current situation occur the header will be shut down digitally within 5 microseconds and an LED indicator will illuminate to aid diagnostics.  Each header has a separate LED to indicate the group in which an over-curent occurred.  Should an over-current occur, the group of 8 notes where the fault occurred will immediately shut down instead of the entire 64 notes.